2008 concours bleeder size

heywier4277 · June 11th, 2012, 04:20 PM

ive looked up and down, and found no clear answer on what thread size and pitch an '08 848 has for the brake and clutch lever bleeders. both mine are ground off and sealed due to fancy driving!

has anyone replaced these, or know where i can find the answer. the stealer wouldnt tell me the part # or the sizes. dicks.

thanks.

i dont even want to know how that happened! it rides straight!!!

crashi · June 11th, 2012, 07:16 PM

99% sure these are M8 x 1.00

MikeERideWNC · June 11th, 2012, 08:28 PM

2008 848 parts break down

It doesn't look like there is a Ducati part number for those.
It seems to be part of the clutch and brake pump assembly.

heywier4277 · June 12th, 2012, 08:31 AM

crashi, and to what ive read, brembo only uses 1.00 pitch.

Rocky123 · June 12th, 2012, 08:45 AM

I think opp racing states it on their website. Tells you brembo used xxx and all others are xxx when you look up banjo bolts.

heywier4277 · June 12th, 2012, 08:59 AM

they do, but when you click on the bleeders it doesnt give you the option of brembo or nissen (1.00 or 1.25) just says m(x) bleeder. i called them, and they told me that its a great question, but had no answer!

eric9877 · June 12th, 2012, 09:31 AM

just go to podium and order some- I'm sure they cary them.

crashi · June 13th, 2012, 05:25 AM

Quote:

Originally Posted by heywier4277

crashi, and to what ive read, brembo only uses 1.00 pitch.

yep you're right. just went to the garage and checked. it's m8 x 1.00. sorry about that

heywier4277 · June 13th, 2012, 12:34 PM

thank you sir.

heywier4277 · January 5th, 2013, 03:17 PM

ok, so a bump to share my findings with the future!

podium racing could not tell me which ones where which.

so i ordered both, and now the world will know

these are for both the clutch and brake lever bleeders, as well as the rear caliper bleeder:

TITANIUM - nipples - TITANIUM 10mm BLEED NIPPLE - Performance Accessories For Your Ducati

these are for the front brake calipers:

TITANIUM - nipples - TITANIUM 8mm BLEED NIPPLE - Performance Accessories For Your Ducati

k thanks...

June 11th, 2012, 04:20 PM	#1
heywier4277 Member No ducatis in the registry Join Date: Dec 2011 Location: CT Coast Posts: 234	Need a clear answer on the lever bleeder sizes ive looked up and down, and found no clear answer on what thread size and pitch an '08 848 has for the brake and clutch lever bleeders. both mine are ground off and sealed due to fancy driving! has anyone replaced these, or know where i can find the answer. the stealer wouldnt tell me the part # or the sizes. dicks. thanks. i dont even want to know how that happened! it rides straight!!! Last edited by heywier4277; June 11th, 2012 at 04:29 PM.

June 11th, 2012, 07:16 PM	#2
crashi Member ducatis in the registry: [848] Join Date: May 2010 Location: north nj Posts: 93	99% sure these are M8 x 1.00 Last edited by crashi; June 13th, 2012 at 05:26 AM. Reason: corrected pitch*

June 11th, 2012, 08:28 PM	#3
MikeERideWNC Senior Member ducatis in the registry: [848] Join Date: Apr 2008 Location: Murphy,NC Posts: 1,097	2008 848 parts break down It doesn't look like there is a Ducati part number for those. It seems to be part of the clutch and brake pump assembly. __________________ Why is there never enough time to do it right the first time, but always enough time to do it again. In the Garage: 2009 Kawasaki Concours 14 2008 Ducati 848 2005 Suzuki SV1000s 2002 Yamaha Kodiak 400 2000 Honda VFR800Fi 1996 Honda VFR750F 1995 Honda VFR750F Last edited by MikeERideWNC; June 12th, 2012 at 04:08 AM.

June 12th, 2012, 08:45 AM	#5
Rocky123 Senior Member ducatis in the registry: [1198] Join Date: Jun 2011 Location: Alpharetta, GA Posts: 957	I think opp racing states it on their website. Tells you brembo used xxx and all others are xxx when you look up banjo bolts. __________________ "I Love Anything Fast Enough To Do Something Stupid On"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

2008 concours bleeder size

bleeder ducati 696

ducati 1198 brake bleeder screw size

ducati 696 front bleeder size

ducati bleeder

ducati clutch bleeder banjo

ducati clutch bleeder size

size bleeder ducati 696

June 12th, 2012, 08:31 AM	#4
heywier4277 Member No ducatis in the registry Join Date: Dec 2011 Location: CT Coast Posts: 234	crashi, and to what ive read, brembo only uses 1.00 pitch.

June 12th, 2012, 08:59 AM	#6
heywier4277 Member No ducatis in the registry Join Date: Dec 2011 Location: CT Coast Posts: 234	they do, but when you click on the bleeders it doesnt give you the option of brembo or nissen (1.00 or 1.25) just says m(x) bleeder. i called them, and they told me that its a great question, but had no answer!

June 12th, 2012, 09:31 AM	#7
eric9877 Banned ducatis in the registry: [Monster 696] [848 EVO] Join Date: Nov 2011 Location: California Posts: 3,180	just go to podium and order some- I'm sure they cary them.

June 13th, 2012, 12:34 PM	#9
heywier4277 Member No ducatis in the registry Join Date: Dec 2011 Location: CT Coast Posts: 234	thank you sir.

January 5th, 2013, 03:17 PM	#10
heywier4277 Member No ducatis in the registry Join Date: Dec 2011 Location: CT Coast Posts: 234	ok, so a bump to share my findings with the future! podium racing could not tell me which ones where which. so i ordered both, and now the world will know these are for both the clutch and brake lever bleeders, as well as the rear caliper bleeder: TITANIUM - nipples - TITANIUM 10mm BLEED NIPPLE - Performance Accessories For Your Ducati these are for the front brake calipers: TITANIUM - nipples - TITANIUM 8mm BLEED NIPPLE - Performance Accessories For Your Ducati k thanks...