[tapit]

Took off the triple for placement of a damper on the 848. I was looking through the torque settings for the three bolts that hold on the triple and am kinda confused by their descriptions of the bolts. It appears that the clamp bolt (top yoke bolt) by the steering nut is 22Nm, but what is the torque for the two bolts that clamp onto the top of the forks? any ideas?

[ELTWIN]

You are correct tapit. 22nm for all 3 bolts in the upper clamp. I cross referenced it to the lower clamp bolts which are all 22nm also.

[tapit]

ok, thanks for confirming