Dyno Tune - ducati.org forum | the home for ducati owners and enthusiasts

Remember me
Login  |   Register

ducati.org forum | the home for ducati owners and enthusiasts > Regional Areas - USA > Southeast

Reply
 
LinkBack Thread Tools Display Modes
Old June 23rd, 2015, 01:00 PM   #1
Member

No ducatis in the registry

 
Join Date: Mar 2015
Posts: 85
Dyno Tune

I know in some of the old posts Redline in Yorktown has been talked about, do they still have a good rep I heard one of their main techs moved away. Any other suggested shops in the VA/NC area. I'm looking to get my Bazzaz tuned for a full exhaust system.
Troy T8 is offline   Reply With Quote
Remove Ads
Old June 23rd, 2015, 07:06 PM   #2
Senior Member

ducatis in the registry:
[848 EVO]

 
cbr6's Avatar
 
Join Date: Feb 2013
Location: virginia
Posts: 819
you can tune it your self with the bazzaz AFM it works great.
cbr6 is offline   Reply With Quote
Old June 24th, 2015, 01:37 PM   #3
Member

No ducatis in the registry

 
Join Date: Mar 2015
Posts: 85
yea ive been trying to find a used one to get but harder than I expected lol.
Troy T8 is offline   Reply With Quote
Old June 24th, 2015, 06:37 PM   #4
Senior Member

ducatis in the registry:
[848 EVO]

 
cbr6's Avatar
 
Join Date: Feb 2013
Location: virginia
Posts: 819
I paid right around $200 for mine new
cbr6 is offline   Reply With Quote
Old June 24th, 2015, 06:40 PM   #5
Senior Member

ducatis in the registry:
[848 EVO]

 
cbr6's Avatar
 
Join Date: Feb 2013
Location: virginia
Posts: 819
just looked, $229 from hard racing
cbr6 is offline   Reply With Quote
Old June 25th, 2015, 05:48 AM   #6
Member

No ducatis in the registry

 
Join Date: Mar 2015
Posts: 85
oh thats not bad. did you run it on the back cylinder or front? next paycheck ill probably pick that up
Troy T8 is offline   Reply With Quote
Old June 26th, 2015, 07:34 PM   #7
Senior Member

ducatis in the registry:
[848 EVO]

 
cbr6's Avatar
 
Join Date: Feb 2013
Location: virginia
Posts: 819
front, rear is hard to get to. And on a water cooled bike there is very little difference between cylinders. But if you want to you can adjust between cylinders with bazzaz. you can also adjust manually down to idle.
cbr6 is offline   Reply With Quote
Old June 26th, 2015, 09:39 PM   #8
Member

ducatis in the registry:
[1198 SP]

 
Join Date: Aug 2011
Location: Gloucester, VA
Posts: 218
Quote:
Originally Posted by Troy T8 View Post
I know in some of the old posts Redline in Yorktown has been talked about, do they still have a good rep I heard one of their main techs moved away. Any other suggested shops in the VA/NC area. I'm looking to get my Bazzaz tuned for a full exhaust system.
Yeah, one of their Ducati Master Techs moved away but they still have two employed there. IMO Redline is still the best choice in the VA/NC area.
I just had their lead tech "JB" build me a mid pipe to connect the Termi full system header to the Termi slip-on twin can mufflers to keep the under seat exhaust on my 2012 Hyper 1100SP. Also installed the DP light flywheel and a fresh dyno tune on the PC. Top drawer service if you ask me.
__________________
`11 Ducati 1198SP SBK Red... 400lbs wet with 182whp/105wtq (STD CF)

`12 Ducati 1100SP EVO Hyper Corse... 382lbs wet with 94whp/73wtq (STD CF)

`12 Aprilia RSV4 Factory... 430lbs wet with 181whp/83wtq (STD CF)
TOP-DUC is offline   Reply With Quote
Old June 29th, 2015, 06:29 AM   #9
Member

No ducatis in the registry

 
Join Date: Mar 2015
Posts: 85
Top Duc how much was your mid pipe build? I also need the same thing.
Troy T8 is offline   Reply With Quote
Old June 29th, 2015, 12:31 PM   #10
Member

ducatis in the registry:
[1198 SP]

 
Join Date: Aug 2011
Location: Gloucester, VA
Posts: 218
Quote:
Originally Posted by Troy T8 View Post
Top Duc how much was your mid pipe build? I also need the same thing.
I had several things done at once so I don't remember the specific cost of the pipe work right off-hand. The pipe cost will likely vary due to the length and curves (time) needed. I had several curved sections that he used to cut and build it up. I recommend to just call Redline and ask for JB.
__________________
`11 Ducati 1198SP SBK Red... 400lbs wet with 182whp/105wtq (STD CF)

`12 Ducati 1100SP EVO Hyper Corse... 382lbs wet with 94whp/73wtq (STD CF)

`12 Aprilia RSV4 Factory... 430lbs wet with 181whp/83wtq (STD CF)
TOP-DUC is offline   Reply With Quote
Old June 29th, 2015, 01:14 PM   #11
Member

No ducatis in the registry

 
Join Date: Mar 2015
Posts: 85
alright cool if I cant get Zard to send me one I will probably do that. I want to get the fender eliminator (here Tues) on their first so i can see the curves and tolerances.
Troy T8 is offline   Reply With Quote
Reply

Thread Tools
Display Modes


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -7. The time now is 08:10 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
SEO by vBSEO ©2011, Crawlability, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.