Search Results for ‘916’

I was taking apart the master cyclinder to clean and I lost the spring that goes into the rubber seal. Does anyone know where I can get another specific one?

Hi guys I’m new to this. I just bought a 98 916 frame and I’m looking to get an engine. Can someone tell me what engine I should be looking for. Also how do I know which model 916 the frame is from... I know there was SP and SPS. Thank you.

I have a new old stock alternator cover that I no longer need. I bought this for my 2002 S4 Monster and then it ended up that the shop could fix my original. I bought this new from a Ducati dealer in the early-mid 2000s. The color is more grey than it looks in the pictures. It is currently on...

Hi All. I am currently talking with my father about getting our 1995 Ducati 916 back up and running. She has been covered up in a garage since 2005 and not started once (I know it's sad). The bike is in perfect condition probably only has about 3,000 miles on it. I wanted to know what are the...

Hi all, I'm new to the forums but I'm not new to Ducati, I've owned and ridden Ducs since my early Scrambler 250 days and we've owned dozens of Ducatis over the years. My husband passed away recently and although I'm keeping many of the bikes in our stable, I am selling one shop queen, our...

I'm looking to buy a 1997 Ducati 916 Mono. I purchased one new back in 97 and unfortunately had to sell it when times got tough. Fast forward to now, and I want to get it back! Only a 97 Mono will do . . . it's an emotional thing. Pete 909.944.9701 [email protected]

Hi all! New here on this forum. We have a 95 Ducati 916 Versace. We are trying to figure out weather it is actually a sp2 or not. Everything on the bike indicates that it is an sp2 I just thought a little input from you guys would be a huge help. We are also trying to figure out what this bike...

Hello, I'm looking for the early style that has the warning light description written out below the colored lens. Please let me know what you have! Thanks!

Looking to buy a replacement Headlight Glass for 748/916/996/998. Most specifically the low beam side, or left side if sitting on bike. Thanks in advance.

Short Version: I did not do a valve adjustment correctly. During the follow up compression test, I heard a loud pop from the horizontal cylinder. I re-adjusted the valve clearances. The vertical cylinder reaches 90psi, no change in wet compression test. Horizontal cylinder has no compression...

I have a 1997 916 biposto. My rectifier wires are fried! Does anyone know which rectifier brand would be a good replacement? I'm looking for a heavy duty rectifier and I also want to relocate it under my rear passenger seat. I'm not very mechanical, but I can connect and disconnect a few wires...

Brand new to the forum and need some help. I have a very low mile (4,782) 2000 748 with a stalling problem that I can't figure out. When I bought it over the winter it had been sitting for 2 years. I replaced all fluids and and the fuel filter and when I finally started it on my rear stand it...

Hi everyone, not a super technical guy when it comes to working on my own ride... i was having a fuel issue with my 1995 Ducati 916 at the track, it felt a bit sluggish for a couple laps and then backfired a couple times...the guy behind me said I shot a nice fireball out my exhaust at him, the...

I know some of you might say they have to be changed out with new ones, but at the two year mark have any of you re-used the same belts? or removed your head/ and popped back on the same ones? My search was mostly re-using the Fuji nuts. (which I won't) When I first did a belt change roughly...

My Foggy rep no4 1998...aesthetically restored...original sticker kit fitted...amazed their still sticky after 16 years...8,500 miles...still looks the dogs

Anyone ever broken a stud loose while removing the fuel pump on a 996 tank? Any ideas on how to fix it?

Hi everyone, I am new to this forum. I am a first time owner of a Ducati 996 sps that has a compression crack in one of the welds on the chassis. It has never been dropped or in any accidents as I personally know the person who had previously owned it. It has 3000 miles on it and I have...

im have a set of upper and lower set,, that upper and lower,, only,, it is precut for the headlights,, and predrilled holes,, i believe its fiber glass i have had it for over 4 years in the garage, hoping to sell it,, and someone else can get good use of it, ,, i can ship it aslong as u pay...

The 998 I have is a stat write off and can never be re-registered in australia. option is to find a 998 frame, (rare as rockinghorse poo) or find an alternative frame and fit my gear into it. does anyone know if the engine & single sided swingarm from the 2006 S4R 998 monster would fit the 2001...