Ducati.org forum banner


  1. Coolant in exhasut

    Hi all I have a Multistrada 1200 2010 model. Recently noticed that I have coolant dripping out of a join in the exhaust from the forward facing cylinder. Now from the little research iv done and putting a mechanical mind to it, the problem may be a leak in the cylinder head. Iv heard that its a...
  2. Termignoni Race Up-Map

    Ducati Monster 821
    Hi guys, Quick question to those who have fitted the termis on their M821 with the up-map. Does the up-map come configured for the OEM air filter (in which I would need a tune for a DNA filter), or is it configured for air-filter mods? Thank you in advance for any help! Cheers
  3. Coring stock cans.

    1199 Panigale
    Hi guys, new to this forum. I have just picked up an 1199 as an upgrade from an 848. The 848/1098/1198 exhausts could be cored quite easily though i never bothered because the slip on's were affordable. I wanted to throw up a post about coring the 1199 stock cans, as i was looking for some...
  4. 2016 Monster 821 Aftermarket exhaust Decibel-levels

    Ducati Monster 821
    Hey all, Just bought a new 2016 Monster 821 and was hoping to get a little input on the following aftermarket exhausts, regarding db levels, problems with cops when riding without attracting attention, etc... : Competition Werkes Termignonis (decat slip-ons vs full system) SC-project Conic...
  5. Monster S2R 1000 pre-silencer

    Hi everyone, I am new to this forum. I am working on restoring a 2007 Ducati Monster S2R 1000, and I am looking for a used pre-silencer/catalyzer (OEM part#: 572.1.028.1B or 572.1.028.1C). If anyone has one to sell, please let me know. Thanks a lot guys!
  6. Melted cloth on the exhaust pipe - cleaning suggestions?

    Ducati Discussion
    Hi everyone, I made kind of a newbie mistake and tried to place a red Ducati cover over my Monster before it had fully cooled down. The result, much to my dismay, was melted cloth on the exhaust pipes, some of which burned off immediately while some of the red still remains elsewhere. Does...
  7. Monster 821 2018 Exhaust

    Ducati Monster 821
    Hello everyone, I would like to choose an exhaust for my Monster, but I could find only some alternatives. Please help me to decide: Termignoni Slip-on - 1100€ SC-Project Twin GP70-R or Twin CR-T - 1040€ SC-Project SCR1 - 740€ Arrow - 710€ As you can see everything is quite expensive because...
  8. WTB Termignoni Exhaust for my Monster 821

    Ducati Monster 821
    Hi guys, I'm new here and just got my Monster 821 last week, and loving it so far. The bike rides great and sounds awesome, but after moving from a Termignoni 1098, it feels like it needs an upgrade. Been hard looking for a Termignoni system but it definitely sounds awesome. Hook me up if you...
  9. Monster 821 aftermarket exhaust

    Ducati Monster 821
    My 2016 Monster 821 is a bit rare in this part of the Philippines so it's hard to get answers to important questions..... Im looking at the QD Magnum slipon. they sell it to fit the 2013 to 2015 821. Will that fit the 2016 too? Also do you have any other recommendations?
  10. Stock Exhaust - 2k miles off 08' 1098s - $200 obo

    EDIT- SOLD! Thanks for viewing, have a OEM exhaust from a 2008 1098s. Very light scratches on mufflers as shown, missing one baffle but have exhaust ECU (not pictured). Was too busy trying to make a cool "knolling" arrangement :D Took off all stock exhaust parts at 2k miles. Asking $200 +...
  11. For Sale: SC Project CR-T TITANIUM 2-1

    Like new SC project CR-T full titanium exhaust for 2012 Ducati Monster 796. Taken off my 2012 Monster since I live in Los Angeles and didn't want to get a ticket for loudness/no cats/whatever else the police would probably throw at me... This exhaust is loud to say the least, measured around...
  12. Can someone please help me with advice on aftermarket exhaust?

    I am a first time Ducati owner, and first time poster on Ducati :), previously only owned japanese bikes, CBR1000RR GSXR 750 etc. I recently purchased a 2012 848 Evo. Love the look and power of the bike but I was looking to purchase an aftermarket exhaust. I really like the look of the 4 pipe...
  13. WTB - Leo Vince GP EVO II Exhaust - 696

    Looking for the Leo Vince GP Style EVO II exhaust for the 696. I know it is discontinued but really trying to find the set up. Message me.
  14. WTB / 999s 06 full exhaust sytem or slip on.

    Wanting to buy either a Storm, Zard, Leo Vince or spark full system for my 06 999s. Please message me if you know Igor have anything for sale. Located in Australia. Will also consider slipons.
  15. FS: OE full exhaust system 2008 1098

    For Sale OE Ducati exhaust system from a 2008 1098. About 1500 miles on it, in storage since ~2009. Any reasonable offer considered. Buyer pays shipping from DFW TX.
  16. New MIVV exhaust slip on remap needed?

    Hey everyone first post here. I have a 2010 Ducati 848 that i just purchased with MIVV suomo slip on exhaust previously installed. The bike in colder temperatures seems to just shut off but is ok when i start it back up and let her warm up till i get a temp reading past "LOW" I contacted...
  17. FS: 2009-2013 Monster Stock Exhaust Pipes

    I have an extra set of stock exhaust pipes in good condition with roughly 10k miles on them. Stock mufflers not included, just the two header pipes and the Y pipe. $200 + shipping or best offer.
  18. new to the ducati world, just a quick question

    hey guys just bought my first ducati, 2008 848. so far i gotta say this thing is freaking awesome. definetley dont see myself going back to inlines 4's anytime soon. but any way the reason why ive made this thread is that im stuck between either getting a graves slip on exhaust or the Bazzaz...
  19. Stock exhaust modification on M900

    Hi! Look at photos. Who did that? It does not harm the engine? Ventilation gases, and the like. http://ipic.su/img/img7/fs/muffmod02.1443378341.jpg http://ipic.su/img/img7/fs/muffmod04.1443378360.jpg http://ipic.su/img/img7/fs/muffmod06.1443378375.jpg http://ipic.su/img/img7/fs/pipes1.1443378387.jpg
  20. New here, need help

    New here, need help, exhaust servo I have a 2013 hypermotard, and have a servo buddy to hook up ( exhaust valve servo bypass) and I can't seem to find where to un plug it and plug this thing in. I have looked around and even asked the dealer, but of course they want 99 an hour. Any help or...