Ducati.org forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter · #1 ·
After removing the factory 'perfromance' air filter element from my 1198, I was surprised to find that the air box had made contact with the element and actually rubbed holes through the element itself.
I have ordered the two piece filter from MWR, so it should all be sorted.

Here are some photo's of the damaged element. Is this a common problem ?
 

Attachments

·
Registered
Joined
·
1,490 Posts
You have more problems than that with those filters have a look in the airbox and see how much shit has leaked passed the shit Ducati setup.
Get a aftermarket filter ASAP.
Do a search on the subject and see how bad the OEM filter is.
 

·
Registered
Joined
·
107 Posts
Discussion Starter · #6 ·
You have more problems than that with those filters have a look in the airbox and see how much shit has leaked passed the shit Ducati setup.
Get a aftermarket filter ASAP.
Do a search on the subject and see how bad the OEM filter is.
I took your advice from another thread @bstar360 regarding the changeout of the OEM filter - I did find a small amount of contamination in the airbox due to sealing issues of the factory setup.
 
1 - 6 of 6 Posts
Top