Ducati.org forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
438 Posts
Oil cooler nipple on crankcase

14x1.5

32.0

LOCK 8
Cooler oil hose connector on crankcase nipple

16x1.5

25*

Lubricate with engine oil
Oil hose union on oil cooler

16x1.5

18*

Lubricate with engine oil
Bolt securing oil cooler bracket to cylinder head

6x1

10.0


Bolt securing oil cooler pack to bracket

6x1

10.0

Thread (mm)

Nm ±10% Tolerance
 

·
Registered
Joined
·
979 Posts
mine leaked from top line where it attaches to oil cooler and a 1/8th turn tightened it back up after 8k miles and never leaked again but I traded it in at 9800 miles. these things vibrate so much it doesn't surprise me more doesn't loosen up. bottom line I tightened too but it was not leaking.

-Carbon
 

·
Registered
Joined
·
1,230 Posts
If a line is leaking, is a Re torque sufficient or should the line be replaced?

Tightening everything up should do the trick.

Follow the specs enclosed above..
 
1 - 6 of 6 Posts
Top