Ducati.org forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
436 Posts
By hooking them up in series, neither will work as the circuit is open all of the time, at least until both are activated which will close the circuit. Try connecting them in parallel.
 

·
Registered
Joined
·
436 Posts
Ok, measure the ohms across the side stand switch, retracted and then deployed, disconnect, attach Q.S. take same reading (you might need your wife g/f to shift). If there's a difference in ohms, maybe add a resister to the different unit?
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top