Ducati.org forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
Hello good samaritans..!!!

I have a Ducati 748, and I recently replaced my dry clutch plates and the clutch boss hub. After replacement, I turn on my bike and try to put it in gear for a test ride…but...It feels engaging in gear, but as I release the clutch to move on the bike is fully in neutral... HELP...!!!! Thanks..!!!
 

·
Registered
Joined
·
10 Posts
Discussion Starter #10
I found out...!!!!! It was the new clutch friction disc. Their thickness are 0.016 IN, and the originals that I removed variate between 0.030In and 0.032IN. I put the old ones and all worked as supposed... Now I am trying to find a disc kit that is not as expensive as the Ducati shop....is $280.. Crazy.....!
 
1 - 11 of 11 Posts
Top