Ducati.org forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Hey team,

I picked up an Arrow Exhaust for my 848 Evo, and I thought I just had to remove the pressure ring for the DB killer to come out, but appears thats NOT the case.

Tried removing the tips, but they are riveted and not allen keys like I though.

Anyone done this?
thanks
joey
 

· Registered
Joined
·
12 Posts
Discussion Starter · #5 ·
So, as an FYI, between the space in the O ring is a TINY Tig welded piece of metal. Like, a 1cmx1cm to simply hold the silencer in place. you can spin the DB killer freely, but this tiny piece creates a stop so that it cannot fall out. Kinda primitive actually. Like nailing a piece of 2x4 in front of an open door so it doesnt close...

Literally took 5 seconds to remove. Lined a flat head screw driver up with where the small weld meets the tip and gave it a tap with the hammer. Snapped right off clean on both. *ping*.... *ping* the end.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top