Ducati.org forum banner
1 - 2 of 2 Posts

· Registered
Joined
·
12,981 Posts
I found that using two wraps of electrical tape around the pieces that the CRG adapter uses not only holds the pieces together when removing them, it squelches any vibrations too. I used get a bit of buzz around 8000rpm on my 848 and 10,000rpm on my Daytona 675 but the tape solved that.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top