Ducati.org forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3,054 Posts
Discussion Starter #1
Is there a difference? I'm aware of the caliper difference, but are the rotors the same? Or different?
 

·
Banned
Joined
·
5,501 Posts
Parts catalog says yes, but I don't think there is a difference. I put the same mono block calipers on my base 848 with the OEM rotors no problem. So I wouldn't think there is any issue what so ever. Key word there, "think" heh ;)
 

·
Court Jester
Joined
·
11,816 Posts
I was told by the seller that sold a set of rims to me (that had non EVO rotors) they would not fit..
 
  • Like
Reactions: jwm2k3

·
Registered
Joined
·
110 Posts
The 848 models with DTC (Corse Se) run 330mm discs, the rest are 320mm.

So it depends which model the wheels are from but even if they are 330mm versions all you need is the 5mm bolt spacers which cost peanuts or make some.
 

·
Registered
Joined
·
12,892 Posts
The offset between EVO and non EVO is the same. The differences are the DTC buttons and the possible size difference. I run the EVO 330mm on my 848 and all that's required are 5mm spacers.
 

·
Registered
Joined
·
3,054 Posts
Discussion Starter #6
Yes, I'm well aware of the DTC difference with the Corse..I used to have a 2012 848 Corse, traded that for a 2010 1198 Corse, and have since purchased a 2011 848, a non Corse this time, for race only....still got the 1198 Corse.

Looking to replace the front rotors on my 848evo racebike. These are 320mm.
 
1 - 7 of 7 Posts
Top