Ducati.org forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
First of all...appologies for this being my first post. Im a member of a few british Ducati forums...but never got as far as registering on this before.

Advertised in a few other places already, so a fair few bits have already sold.

If theres anything you cant see on the list that your after please ask.

Parts are located in Derby UK, howevr will post worldwide.

Stripping my 2003 998 Bitsa

Loads of nice rare bits for sale,

Here's a list of the bits ive managed to think of so far, more maybe added.

Some prices may seem expensive, however i have had to base most of it on what things have sold for on ebay, then tried to make them a little cheaper.

Bike is stipped, everything is cleaned and bagged where possible.

All parts are 998 however most will fit any of the 748/916/996/998 series bikes...some parts will also fit later bikes...like mudguard, sprocket cover etc *PLEASE ASK IF UNSURE*

I will combine items for and discount accoordingly.

Everything must be sold down to every last nut and bolt!

All prices exclude postage, i will however post as cheap as possible, please ask for a price.

I will accept paypal as payment however buer must send as a gift or cover the transaction fee of 3.4%. A bank transfer is my prefered method of payment as is a whole lot easier for both parties and free.

All parts are in good condition however please ask for a condition description and i will happily take photos of any marks.

Photos on request

Please either reply to this thread or start a conversation with me if interested in anything.

Appologies for the rant, just want to make sure i can keep up with sales.

Cheers Tom

Ducati 998 Bits for sale
998 Frame with V5 black powder coated (hpi clear on 03reg) with tax and mot + eccentric head tube perfect for 1098/1198 conversion £1000
Swing arm + hub + eccentric + rental quick release sprocket adapter and 520 renthal sprocket + all nuts (gold painted magnesium look) - £350
Headlight bucket with ears (black powder coated) - £100
Ducati 998R lower Yoke 56mm (Ohlins fitment) - £220
Gold anodised top yoke + stainless fastenings (Magnesium look) - £60
Ohlins FG8851 forks 996R/998R (10/01/2001) - £900
Brembo P4 front calipers Gold 4 pad type (998R) - £155

Brembo Cast Iron fully floating disks (early type like found on foggy reps and sps) - £280
Carbon Fibre Front mudguard (MS Production?) looks to be 848 type - £80
Left hand switch gear - £35
Right hand switch gear - £25
Front Brake reservoir - £10
Clutch Reservoir - £10
Throttle assembly + cable - £25
Headlight bucket to frame bracket - £10
Ducati Performance Carbon Air Tubes with inline filters (included) + indicator mounts - £200
Ducati performance small Carbon Mirrors *RARE* - £175

Front left indicator - £10
Front right indicator - £10
Rear Right indicator - £10
Rear Left Indicator - £10
Ducati Performance Carbon Radiator surround/V piece (998) - £80
998 Radiators - £100
998 rad fans - £25 each
Standard Rad hoses 998 - £30
996R engine, Sand Cast cases, Deep Sump, Corse vented clutch engine case, 3300k miles,) Just been dyno’d, running well at 137bhp 5/8/2014 – dyno man seemed to think its had some cam work…his dyno runs low so could be 140+ (no numbers F01 stamped!) Has been rebuilt at somepoint, has “Ducati Manchester” race team roots…more info on request (will have fresh belts and filter when buyer is secured) -£1800
Oil cooler and lines - £120
Termignoli full 54mm system with Titanium cans (VERY VERY RARE) including rare heat shield - £1200
996R ECU set up to run with the above (61600.630.00 – 996R-DUCATI007) - £200
Standard 998 air box painted black with carbon wrap on sides - £85
Airbox fastenings - £10
Ducati Performance red star type radial clutch pressure plate + spings + bolts - £80
Ducati performance Titanium sprocket cover - £80
Ducati performance chain guard - £60
998 fairing lowers to suit belly pan (red with graphite painted vents) - £170
Side stand + bracket + spring etc - £65 will fit most bikes
Lockset with 2 keys - £80
996r/998 Injectors + Rail trumpets etc (998) - £150
Throttle body fuel hose and connectors - £10
998 Battery box with regulator bracket…slight repair - £40
Brembo rear master cylinder - £30
Rear Master Cylinder bracket + light switch (sticking) - £10
Rear brake reservoir - £5
MS Production/LLmberger Carbon underseat heat shield - £100
Rear disc- £35
Swing arm pivot axle - £20
Brembo rear brake calliper - £35
998 coils - £40
998 regulator/rectifier - £20
Fuel pump - £80
Rear brake light - £25
5 spoke Alloy Marchesini Wheels (black powder coated) with Pirelli super corsas - £650
Genuine Ducati Carbon Belly Pan 996/998R/S (road type) - £160
Mono seat rear light bracket - £25
748R mono seat, recently painted painted panels with gold fine lining RED - £300
RED fuel Tank with black decals (recently painted) - £300
RED genuine nose cone, white number board with gold fine lining, black decal (recently painted) - £200
Crank breather tank - £20
Dzus fastening kit - £50
22 pin Front wiring loom - £50
Fuel pump solenoid - £20
Horn - £5
Standard Brembo later style front brake master and lever (bleed nipple snapped, god for spairs) - £25
Fuel tank pin and fastenings - £10
Clutch push rod + bearing - £5
Copper exhaust header nuts - £5
Top engine bolts/mounts x2 - £20
Clutch and friction plates (worn but usable) - £15
DID 520 chain, good condition - £45
Air Temp sensor - £5
998 later large bore Slave cylinder - £20
Head race bearings - £5
 

·
Registered
Joined
·
1,229 Posts
:blind:
 

·
Registered
Joined
·
9 Posts
Any pics available of this?
Genuine Ducati Carbon Belly Pan 996/998R/S (road type) - £160

Thanks!
 

·
Registered
Joined
·
1 Posts
Forks/brakes

Are the forks and front brakes still available? What condition are they and can you send photos?

Thanks
 
1 - 8 of 8 Posts
Top