[lemmy999]

I installed the Speedymoto Kukri pressure plate and stainless springs and now the clutch feel is not so good. The best way to describe it is it feels like there is air in the line. It seems that the clutch engage/disengage point is closer to the bar and not as abrupt. So is it likely the plate causing this or the springs? I am considering putting the stock springs back in and seeing if this helps. Has anyone else noticed this?

I know that on the stock plate, the arrow points to a certain locattion...so it can't be rotated in any direction when installing. However I never could find any kind of mark on the Speedymoto plate. Could this be my problem?

 

[Tufduc]

that is absolutely your problem.....

take it apart... look on one of the 6 posts where the spring retainer is screwed into, and one of the posts will have a notch scribed across the top of it.

Now look at the 6 corresponding holes on your pressure plate, one of those holes will have a notch scribed there as well.

re-assemble and make sure that the 2 notches you found are lined up, (there are pics in the kukri directions) and away you go

 

[lemmy999]

That is the problem, I can't find the notch in the Kukri plate and there were no directions with it. I see the notch on the posts, but not on the plate.

 

[lemmy999]

Ok, I went down and looked closer and saw the differnce. Clutch works great now. Thanks!!

 

[Visitor Q]

Pix, PIX!

Jason