Hey everyone, i just got my competetion werkes ltd mount kit in mail today. i'm not the most savvy person when it comes to installing bike parts. i have the instructions but does anyone have a post with step by step pics of the install? any advice before i install it once my bike comes back from dealer...who is taking their sweet a$$ time doing a cam upgrade. any help would be appreciated
competition werkes install
1 - 20 of 27 Posts
Joined
·
357 Posts
I've had it almost a year...
Do you have any specific questions?
HORNETDRIVER
I thought the directions were pretty straight forward.
Do you have any specific questions?
HORNETDRIVER
Joined
·
1,080 Posts
Joined
·
67 Posts
I thought the CW kits came with turn signals that mounted in the vents? Can you order this kit without the turn signals?
nice pics. that's the kit i bought as well. i like the look better than the higher mount. you can order the kit, but just don't use the vent signals and buy an integrated tail light
http://cgi.ebay.com/ebaymotors/1098...013QQitemZ230224638466QQrdZ1QQsspagenameZWDVW
adds on the price...there's several turn signal options
http://cgi.ebay.com/ebaymotors/1098...013QQitemZ230224638466QQrdZ1QQsspagenameZWDVW
adds on the price...there's several turn signal options
They do. Not sure if you can order without the turn signals? I choose not to use them. Went with the Clear Alternatives integrated signal tail light instead.
Joined
·
4,337 Posts
Yeah I hear ya there but until you build one better and cheaper...
Jason
ps. It does come with the plate light as well. Hey, there in buisness to make money so what can ya say really other than you won't buy it.
Hey Buck, keep me updated with the fuzz if you ever get hassled for it.
Vistor Q
The plate on my Monster is much harder to see (tucked in with high mount exhaust). I've had the local PA boys right behind at stop lights without an issue. Guess it depends on who's jurisdiction you're in and the individual officer?
I did however hear that someone was nabbed pulling into our local dealership recently.
The plate on my Monster is much harder to see (tucked in with high mount exhaust). I've had the local PA boys right behind at stop lights without an issue. Guess it depends on who's jurisdiction you're in and the individual officer?
I did however hear that someone was nabbed pulling into our local dealership recently.
Joined
·
192 Posts
Guys can you help? I have the CW standard eliminator for the 848. I'm to the point it asked to pull the stock wires through into the under plastic tail section.
Here is my problem, I can't even get to the point to mount the signals or get to the wires because the plastic cover; were the seat locks, seems to be "spot welded or glued.
I have read the instructions over and over I am at a loss. How the hell do I get into were the wires are at and get to the area where the metal signal brackets mount.
Thoughts!
Thanks in advance.
Cory
Here is my problem, I can't even get to the point to mount the signals or get to the wires because the plastic cover; were the seat locks, seems to be "spot welded or glued.
I have read the instructions over and over I am at a loss. How the hell do I get into were the wires are at and get to the area where the metal signal brackets mount.
Thoughts!
Thanks in advance.
Cory
Joined
·
192 Posts
Ditto from last reply.
Thanks Buck N.
Thanks Buck N.
1 - 20 of 27 Posts
