Ducati.org forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
503 Posts
Discussion Starter #1
I have enough parts now to do this conversion for a person with a 1198 looking for OEM Ducati Traction Control

The kit will include

1198s Dtc unit
1198s 330mm rotors with the traction control pins
Speed sensor and bracket

I can provide a 1198s Ecu to enable the DTC
Or I can flash yours.. Flashing would be much cheaper

The Ecu is either a race or slipon I'll check to make sure soon

And that's all you need

I'm thinking around $700 (not final but ballpark)

Let me know!!
 

·
Registered
Joined
·
503 Posts
Discussion Starter #3
For a 1098 You would need to replace the wiring harness with a 1198 and a microtec ecu..

I haven't looked into using the stock ecu or a modifying a 1198s ecu.. If anyone has any input let me know
 

·
Registered
Joined
·
503 Posts
Discussion Starter #6
Bazzaz doesn't use sensors, it's a joke/toy that isn't remotely close to the Ducati system.

I totally agree, but because of the extra parts and money, I guess he's going that route..

Just a thought.. Professionally fine tuning the Bazzaz zfi and tc will cost much more .. It's tricky system to perfect

If anyone else is interested send me a pm with any specific questions
 
1 - 11 of 11 Posts
Top