Ducati.org forum banner
1 - 2 of 2 Posts

· Registered
1,134 Posts
Discussion Starter · #1 · (Edited)
Hey folks, just reduced my bike to $13K. I have spent over $20K on the bike. It is used but it is gorgeous. Ducatisti and many others comment on how gorgeous this bike is, even those XX9 haters because the bike is just done right.

Bought as new/demo from BCM Motorsports this year with 2,400 miles on it, warrantied through 09/08. Red with white plates, front plate is professionally painted and cleared in better-than-factory quality. 6,500 easy miles and rarely tached over 7-8K. Never down and meticulously maintained. Some tiny chips on underside/front and a decent one on front fender that's not through the red, all can be easily touched up. Lower fairing hairline crack from Termi heat despite wrapped pipes and heat shield. (second fairing to do this, unavoidable so far) None of this is noticeable unless you're looking for flaws. Other than that the paint is in great shape and it's a gorgeous bike. Always garaged, washed/waxed/compressed air and wiped dry. The bike is smooth but fast as hell, and truly unique if you're in the market.

Other stats:
- Full Ohlins of course
- Full 54mm wrapped Termi
- Custom mapped with PCIII pushing 136rwhp/78 lbs
- QuickShifter
- STM Evoluzione slipper clutch with recent basket and plates
- Speedymoto 10-spoke clutch cover
- Paulimoto slave cylinder
- Recent R.K. 525 gold chain with DP 15/41 sprockets
- Galfer wave rotors with Ferodo pads
- Speedymoto upper triple clamp
- Helibars
- ProGrip Gel grips
- Pazzo adjustable levers
- Speedymoto under-body sliders
- Yoyodyne fork sliders
- Swingarm sliders (forget the name)
- CF/billet bar-end sliders
- DP mirrors
- Paulimoto custom 999S reservoir covers
- Ducati Performance GP fully adjustable rearsets
- Sargent Carbon FX seat
- Light Tech gas cap and oil filler cap
- HIDs: 6000K low and high with low integrated into high
- Zero Gravity DB dark smoke windscreen
- ProGrip 5007 CF-look tank guards
- Stock taillight housing with smoked lense and integrated taillight/signals. Plate hangs nice and low off Termi can without hitting anything, nice look.

- Hugger/chain guard
- V-shroud radiator guard
- Upper fairing inserts
- Air runners
- Exhaust guard
- Belt covers
- Ignition shroud
- Tank key guard

Pics of the bike with Stomp Grip pads on it, took them off because I didn't like them. A few other mods since these pics were taken but the look is pretty much the same.




1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.