Ducati.org forum banner
1 - 20 of 24 Posts

·
Registered
Joined
·
114 Posts
Discussion Starter · #1 · (Edited)
I have a 70 mm Termignoni full exhaust system for Ducati 848/1098/1198. I also have a tuned race ecu designed for the exhaust to be used on a Ducati 848. The exhaust does have two small dings from going down at the track but they have no effect on performance at all. The exhaust system has full flow and works perfectly. Included is a carbon heat shield. $1200 or best offer
Braking wave rotors. These can be used on Ducati 749/999/848 These are 320mm rotors. $375
Located in Bridgewater, NJ. My name is Adam and my phone number is 908 875 7758
 

Attachments

·
Registered
Joined
·
114 Posts
Discussion Starter · #5 ·
I still ride but own a BMW now. If you want to ride I'd be interested. Pm me your contact info and we can set something up.
 

·
Registered
Joined
·
3,569 Posts
Man I'm looking for a race header pipe to make a full system. Is the race ecu different then the ducati performance ecu that comes with slip ons?
 

·
Registered
Joined
·
6,792 Posts
The OP needs to state which model the system is for, as they are different between the various models.

Different exhaust port sizes, and specific ECUs for the model.

And yes Garrett - the ECUs are different for the full system compared to the slip-on-only ECU.

And the 848 has 320 mm rotors where the 1X98s have 330 mms (but the smaller ones can be used on the 1X98s without the spacers).
 

·
Registered
Joined
·
114 Posts
Discussion Starter · #9 ·
This is a 70 mm unit that will fit on 848/1098/1198. The ecu is programmed for a ducati 848 with 70mm pipes. The exhaust has roughly 1000 street miles and roughly 500 track miles
 

·
Registered
Joined
·
114 Posts
Discussion Starter · #11 ·
I think you are mistaken. The exhaust was removed from a 1098. I used it on my 848. This will fit the models listed above with no modification.
 

·
Registered
Joined
·
180 Posts
Just to help clear the confusion on the exhaust.

Pat is correct if you have an 08-09 848 as the non EVO 848 / 1098 have the same size exhaust ports.
But, if it is an EVO 848 then the exhaust will interchange with an 1198 but not a 1098 as the EVO 848s share the same port size as the 1198.

So the question is, was your 848 an EVO?
 
1 - 20 of 24 Posts
Top