Ducati.org forum banner
1 - 1 of 1 Posts

·
Banned
Joined
·
5,501 Posts
Thats what happens if the cable is loose. The dash isn't getting any data from the ECU.

Unfortunately, I've never had a 749/999 with the stock fairing stay, so I don't know how you access the connector. But I'd first get to the connector unplug it, clean out the pins (on the dash side) with contact cleaner and plug it back in again.

My guess is, its a faulty dash. They've been starting to fail, there are a bunch of people on other forums with issues. But give it everything you can to check over everything before calling it a failure.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top