Ducati.org forum banner

I think i'm in trouble need your help guys newbie 848 belt gear setting pic and video

1925 Views 22 Replies 3 Participants Last post by  Donger
2
Hello there i have decided to discover more about my bike ( and it wasn't great idea :kaioken:). I was trying to change cambelt but i thought that green marks with dots will help i.e. where and what supposed to be and i havem't got any idea how to fix it i check videos on youtube and pictures but non of them i have found were connected to 848 ... stupid me why i havnt mark anything :rlwhore: any one have idea how many theet from the line or any chance i can adjust it on my own or send it to ducati lol... pls help wanna back to 2 wheels.. Was looking here but i found 1098 which is different, checked utube, google images cannot find anything close to 848 :/

sometimes when i was trying to spin rear wheel @ 6th gear something was blocking dont wanna risk anything lol since i already have done big mess.



See less See more
1 - 20 of 23 Posts
i was trying and i opened a lot of pages but mostly what i have found was how to adjust valves and etc. i have no idea what do u call it to find the right topic... sorry
3






cannot move it to 5 o'clock anymore... is this alright or not?
See less See more
which one should show 3 o'clock or 5 the right one or the one towards top of T mark? sorry for my stupidity lol :rlwhore:
See less See more
3
horizontal one i manage spot on thank you so much i own you one :ahhh: but vertical one 1st picture u showed with V and H and its different more like 7 o'clock than 5 o'clock can u have a look on pic and tell me which one. cheers

1.


or

2.


3.


1st or 2nd pic? thank you so much
See less See more
I was just trying to start it on one cylidner to check if its on lol however i still dont get the vertical one well i will try to figure it out somehow thank you for your time
2
so i set it up like that... and cannot spin back wheel on 6th gear... like left gear from the vertical is blocking the wheel...



See less See more
2
yeh so i moved it to the right place as u marked but still cannot move it bascilly im doing something wrong with vertical since i started bike on one horizontal cylinder ...





any other ideas what i can do wrong or whats is wrong with the bike :/

ps: do u want me to take that gold cover out aswell?
See less See more
i dont know how to find vertical tdcc, i took the belts off put the red dot ( the one u have marked on the picture ) in line and then adjust cams as u said earlier 3 o'clock on horizontal and 5 o'clock on vertical...
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top