Ducati.org forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
28 Posts
Did they give you the actual valve clearances or just tell you they were OK? I ask because Ducati has a wide range of clearances but there are specs for best performance that are more narrow. Also, your valve covers are still in place so I'm assuming the photo was before or after the valves were checked since the valve covers have to be removed for that operation. Just curious.
 

·
Registered
Joined
·
51 Posts
Discussion Starter · #3 ·
The valve clearances are documented. on my paperwork. It is a reputable shop. I have known the owner for 20+ years. And I am friends with the lead tech. Yes the valves have been done, It is just waiting for a couple gaskets, if I recall. But she is done, Just need a couple things, and to put her back together.
 

·
Registered
Joined
·
51 Posts
Discussion Starter · #7 ·
There are 3 screws. One on each side. And one behind the Ducati rubber butt bumper. It snaps in, and is held with velcro. Just grab the rubber bumper and pull it off. The 3rd screw is right behind it.
 
1 - 8 of 8 Posts
Top