Ducati.org forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
Hello I have got mosnster 1000, production year 2003 with 34.000 on odo. Yesterday it started hard and only one cylinder sparks. So I exchange ignition coils between, but both are ok. It seems that problem is from source of ignition - ecu? Please could anybody help me with wiring, any source for wire diagram for this 02/03 monster?
 

·
Registered
Joined
·
4 Posts
Discussion Starter · #2 ·
I found pinout of ecu module (it is magneti marelli iaw 59m.a8 which I found under the ducati sticker, these unit seems to be same like on monster 620,695 and also some fiat punto 99-05)
www.ducteile.de/assets/files/dowloads/59M.pdf

Output for ignition coils are on pins 38 (horizontal cylinder) and on pin 10 (vertical cylinder)
What is ecu input for ignition? Is it separate for horizontal and vertical cylinder or is it only one sensor for both cylinders? I think it could be any hall sensor like on cars (crank position or valve cam position sensor), am I right, or motorcycles uses any other system?
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top