Ducati.org forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
529 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter · #3 ·
Just fired off an email to them inquiring about the "washers". Thanks Charles!
How'd the install go, is this a difficult install?
 

·
Registered
Joined
·
529 Posts
How'd the install go, is this a difficult install?
Mine was super easy because I had the swing arm off of the bike for a repair. I'll let some one else chime in that has done this while the swingarm was still installed. I took a quick look at mine this evening and it looks pretty tight in between the head of the bottom bolt and the exhaust. The top bolt will come straight out with no obstacles in the way.

If you want to check out my project , I posted the video here last week in the How To section (linked below as well); the ride height linkage install shows up around the 5-minute mark.

Make sure you grease or use anti-seize on the threads on both ends of the adjuster--not just under the nut--to help prevent them from seizing in the future.


 
1 - 4 of 4 Posts
Top