Ducati.org forum banner
1 - 6 of 6 Posts

·
Registered
Joined
·
98 Posts
Discussion Starter · #1 ·
Hey guys,
Curious question that I couldn't quite pin down reading some other threads...

I'm thinking of picking up a '10 SF 1098S to go along with my '08 1098S, and I have some questions about parts interchangeability.

I have a TTX (valved for factory ride height, no aftermarket linkage) can I use it on an SF?

Wheels: Do the forged alum wheels from the superbike fit the SF? And if they do, are they lighter than SF S wheels and worth changing?

Thanks in advance.

This is me: :blind:
 

·
Registered
Joined
·
604 Posts
I did both those mods on my SF.

I have a DU931 and works great and it's actually listed for the 1098.

I picked up some S wheels from a 1098 Tricole, perfect match.

I also did a front brake transplant from a Panigale 1199 with M50's.

Yes, well worth it.
Auto part Vehicle Motor vehicle Suspension Suspension part

Tire Automotive tire Rim Vehicle Wheel
Land vehicle Vehicle Motorcycle Motor vehicle Automotive tire
Land vehicle Vehicle Tire Automotive tire Alloy wheel
 

·
Registered
Joined
·
81 Posts
I don't know about the shock.

In regard to the SFS wheels. They are the exact same item as the 1098 S wheels.
So there's no weight advantage in changing unless you go for the Magnesium wheels in the DP catalogue.
A quick call to the spare parts department of your local dealer will confirm this if they look it up on the computer.
 

·
Registered
Joined
·
98 Posts
Discussion Starter · #6 ·
Ok thats what I was thinking about the wheels not being any different, but I might still do it anyway for aesthetics. I definitely dig the red stripe, as opposed to the bronze. Good info on the shock too. Still looking as the options. Thanks for everyone's input.
 
1 - 6 of 6 Posts
Top