Ducati.org forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 · (Edited)
I am changing the seals on a 2010 848 I just bought. Using the manual, it says to remove the Allen bolt on the bottom of the fork leg to completely disassemble. The problem is, once I cracked the bolt loose, it spins the tube that is in the bottom of the fork leg. Even if I hold it still I can't get the bolt out! I used a ratchet by hand so I'm sure I didn't strip it.
 
1 - 3 of 3 Posts
Top