Ducati.org forum banner

Signal Mod answer

2118 Views 4 Replies 4 Participants Last post by  CAT3
I have been asked about how I did the signal mod. It was very simple. I took the tail off. Disassembled the license holder. You cut the signal wire leaving enough wire to splice. The actual blinkers come off without disassembly. Black tape the signals to the subframe matching them with the exhaust vent. Put everything back together and your done. You need to find a place to black zip tie the license plate.
1 - 5 of 5 Posts
I do but they are to big to fit on the site. How do I shrink them?
Right click on the pic, go to properties and change the size. when you're done "save as" then post.
Windows XP- http://www.microsoft.com/windowsxp/Downloads/powertoys/Xppowertoys.mspx

Windows Vista- http://www.vso-software.fr/products/image_resizer/

Both free, and work quicker, easier than Windows picture viewer.
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.