Ducati.org forum banner
1 - 1 of 1 Posts

· Registered
1 Posts
Discussion Starter · #1 ·
Hello Lads, Lasses,
Trying to un-seize the pistons from my front caliper, and was wondering what the nominal size of the banjo bolt is? So I can buy another regular bolt to plug up the hydraulic channel and press some grease into the bleed nipple.

Already tried compressed air, but that worked on only one of the calipers. Tried scraping the recalcitrant guck, and compressing the seized pistons with a C-clamp. Did not budge under compressed air afterwards.

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.