Ducati.org forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hey guys... having a slight issues reinstalling my OEM damper after installing the speedymoto triple clamp.

I have it all tightened down but the supplied bolt ( SpeedyMoto steering lock extension (Fitted with 40 mm bolt replace with 25 mm for 848)), the head of the bolt seems to be like a MM to tall and it hits and scratches the damper. :(

I'm not exactly sure what i should do next... cause it looks all correct. :confused:

pix attached so hopefully someone can point something out to me. The 2nd photo, shot from above, is how far the damper goes into the clamp before stopping and scratching the underneath of the damper.
 

Attachments

·
Registered
Joined
·
7 Posts
Hey, did you figure this out? The raised boss around the bolt hole looks wrong to me. I am thinking it needs to be cut off. I am installing a set right now. Any one else know the answer?

Hey guys... having a slight issues reinstalling my HeyOEM damper after installing the speedymoto triple clamp.

I have it all tightened down but the supplied bolt ( SpeedyMoto steering lock extension (Fitted with 40 mm bolt replace with 25 mm for 848)), the head of the bolt seems to be like a MM to tall and it hits and scratches the damper. :(

I'm not exactly sure what i should do next... cause it looks all correct. :confused:

pix attached so hopefully someone can point something out to me. The 2nd photo, shot from above, is how far the damper goes into the clamp before stopping and scratching the underneath of the damper.
 
1 - 2 of 2 Posts
Top