Ducati.org forum banner
Cancel

Stolen pictures of an aftermarket racing exhaust

5745 Views 22 Replies 12 Participants Last post by  JohnnyDuc, 
Pierre Col
2
If you want your D16RR to look and scream like Stoner's winning bike:


The price of the kit, including the lower right fairing, is announced to be very very "racing"
See less See more
Reply
Save
Like
1 - 20 of 23 Posts
S
I heard a rumour about this exhaust late last year, and it's substantial power increase too!
Reply
Save
Like
HORNETDRIVER
...I wonder...

I'm thinking this isn't the "race" exhaust that comes with the RR.

Right?

HORNETDRIVER
Reply
Save
Like
desmohardpipi
The included exhaust is just a non-cat version of the legal one with less baffle and maybe some bigger tubes here and there. The Termi looks like about $5k worth of blood flow redirecting exotica. Good thing we all have cubic money.
Reply
Save
Like
S
The Real Thing

This is a picture of Stoner's bike or one of the spares. Taken at the Long Beach Cycle Show 07.

Attachments

See less See more
Reply
Save
Like
alfredob
One race exhaust already comes with the DD16rr besides the stock. I will keep my two exhaust that come with the bike and perhaps consider this new exhaust at a later time. As far as looks this exhaust would not even look good because it would leave the two holes (for the terminal exits of the stock exhausts)behind the seat uncovered therefore taking from the style of this gorgeous bike.
Reply
Save
Like
alfredob
Now, if they provide also the replacement rear seat and related plastic that, it would be a good combination.....probably with a ticket of somewhere in the neighborhood of 7 or 8 thousand USD.
Reply
Save
Like
alfredob
I 100% agree
Reply
Save
Like
Pierre Col
2
Just to remember, the "102 db racing" exhaust packaged with the bike, with no catalyser nor big can but two straight pipes under the seat:


The street legal exhaust:


The one on the stolen pics, with lower right exhaust, is a third one...
See less See more
Reply
Save
Like
alfredob
Whow.... this is really a new one....what are they doing with the two holes that remain uncovered in the tail?
Reply
Save
Like
D
3
@ ducati factory:

pics where schot before 1st D16 left the factory;)





See less See more
Reply
Save
Like
desmohardpipi
Nice pics, thanks.
Reply
Save
Like
JohnnyDuc
It shows an open Magnesium clutch cover, and looks like a magnesium pressure plate. I have heard that the new exhaust adds about 20 horsepower to the bike.
Reply
Save
Like
JohnnyDuc
alfredob said:
Now, if they provide also the replacement rear seat and related plastic that, it would be a good combination.....probably with a ticket of somewhere in the neighborhood of 7 or 8 thousand USD.
Click to expand...

Both are included at $ 9,000.00
Reply
Save
Like
D
JohnnyDuc said:
It shows an open Magnesium clutch cover, and looks like a magnesium pressure plate. I have heard that the new exhaust adds about 20 horsepower to the bike.
Click to expand...

think that's i bit to much. even for a kit like this.
But never say never. when it puts on 10 @ the wheel i"ll be amazed.

this winter where preparing an engine, flowed heads mod timingn,.....together with this exhaust. 200wheel would be nice.
Reply
Save
Like
Sedici
alfredob said:
One race exhaust already comes with the DD16rr besides the stock. I will keep my two exhaust that come with the bike and perhaps consider this new exhaust at a later time. As far as looks this exhaust would not even look good because it would leave the two holes (for the terminal exits of the stock exhausts)behind the seat uncovered therefore taking from the style of this gorgeous bike.
Click to expand...
Wait a second, You guys understand that this kit comes with a new tail section and lowers, right ? So there will be no holes left over from the old pipes comming out the top of the tail section... This picture below is out of the accessorie cataloge that Pierre Col was nice enough to share with us a while back. ( I'm getting one for sure ! ) Too cool !......

Attachments

See less See more
Reply
Save
Like
D
Sedici said:
Wait a second, You guys understand that this kit comes with a new tail section and lowers, right ? So there will be no holes left over from the old pipes comming out the top of the tail section... This picture below is out of the accessorie cataloge that Pierre Col was nice enough to share with us a while back. ( I'm getting one for sure ! ) Too cool !......
Click to expand...

yes it's a complete kit with new tailsection and belly.
We've ordered 4 :), but it''s not clear when they will arrive
Reply
Save
Like
wjn
daveteam848 said:
yes it's a complete kit with new tailsection and belly.
We've ordered 4 :), but it''s not clear when they will arrive
Click to expand...
You are in Belgium?

I want to take a look when you got these parts in, better, hear the sound of it.

Thanks in advance.
Reply
Save
Like
A
I am being quoted $9900 delivered and installed in the states with 25HP added at the crank. Dealer does not know when they will first show up.
Reply
Save
Like
JohnnyDuc
I'm actually thinking about getting the damn thing.
Reply
Save
Like
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Ducati.org forum
A forum community dedicated to Ducati owners and enthusiasts. Come join the discussion about reviews, performance, modifications, superbike racing, riding gear, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
1098/1198 848 Ducati Discussion Australia For Sale/Wanted
Top