Ducati.org forum banner
1 - 20 of 72 Posts

·
Registered
Joined
·
503 Posts
Discussion Starter · #1 · (Edited)
Moto MFG paddock stand with wheels and extra mount plate and frame attachment $350
Stand will be available after part out is completed
--------------
Black great condition rear 5.5 wheel 250 + ship
3k miles on tire
--------------
08-10 848 dark matte tail .. (Not 11-13 stealth) $175
--------------
1x98 ride height adjuster $40 shipped
--------------

--------------
_______________________________
Sold list:

Ohlins FGRT 803 Forks (Superbike valving) SOLD
Ohlins TTX SOLD
Dcushop D2 (Daytona) 2 position Linear link SOLD
Kyle link SOLD
AFMF quick change sprocket and carrier 41t SOLD
Galfer 1198S/r 848Evo Corse Rotors SOLD
DP Carbon Solo Cowl SOLD
Lightweight Monoposto Aluminum Subframe SOLD
Superpole seat SOLD
Sharkskins track fairings SOLD
Termi 70mm headers SOLD
Zard full carbon Slipon SOLD
Ducati Quickshifter SOLD
1198 Traction control unit, and speed sensor SOLD
DP Wet slipper clutch 1k miles SOLD
Stock OHLINS SOLD
black front wheel SOLD
SP Electronics (nemesis) GP Quick Shifter SOLD
Ducshop 28mm triples with -1° rake kit
Fat DUC O2 Manipulators $65 Shipped
TC-Pod


*************** Please READ *****************

All items unless otherwise noted, are priced without added PayPal fees and Shipping

Local Pickup in Orange County CA

Pics and more parts coming soon.. I have some on my phone so I can send them if needed

Auto part Bicycle part Connecting rod Revolver Transmission part
Auto part
Land vehicle Vehicle Motorcycle Motor vehicle Automotive tire
Automotive design Vehicle Automotive exterior Car Bumper
Auto part
 

·
Registered
Joined
·
828 Posts
Fairings including tank is a smoking deal for $400! Too bad I have two sets of body work already, or I'd be all over this.
 

·
Registered
Joined
·
8,735 Posts
Holy shit! Put me down as next on the list for the fairings/tank combo if it doesn't work out with the other guy! Are the fairings damaged at all?
 

·
Registered
Joined
·
8,735 Posts
Also if you sell the forks and still want stock ones I have a set I can sell you. Sounds like you're just selling off the aftermarket stuff and bringing it back to stock? If you need any stock parts, let me know, I might have it.
 

·
Registered
Joined
·
503 Posts
Discussion Starter · #8 ·
Thanks guys

I have local buyer lined up for the bodywork, he's picking it up Saturday

Forks pending payment
Superpole seat pending payment


Triples are actually 53/56 forgot I had spacers installed, the spacers come with the triples
 

·
Registered
Joined
·
503 Posts
Discussion Starter · #10 ·
Moving on to a different bike?

Yes, I'm thinking 1299
Maybe an older 1199R

Just got back from the track yesterday and my buddy on his new zx10 kept getting me on the straights. Can't let that happen again!

I have another bone stock 848 I might hold onto, I'm not too sure of her fate either

Any suggestions?
 

·
Registered
Joined
·
503 Posts
Discussion Starter · #12 · (Edited)
Updates with pics and new parts:

DP slipper clutch 550
DP carbon solo cowl $160
08-10 848 dark matte tail .. (Not 11-13 stealth) $220
MWR air filter $65
Carbone Lorraine C60 front brake pads 1 track day use $85

TTX price and option update
 

·
Registered
Joined
·
828 Posts
Tadashi, can you post a pic of the TC unit that lets you change TC settings on the fly? LOVE that feature about the RSV4. Is it plug and play? I also love my galfer waves, so thinking about your waves as spares. How many miles on them?
 

·
Registered
Joined
·
503 Posts
Discussion Starter · #14 ·
Tadashi, can you post a pic of the TC unit that lets you change TC settings on the fly? LOVE that feature about the RSV4. Is it plug and play? I also love my galfer waves, so thinking about your waves as spares. How many miles on them?

It's plug and play, it piggybacks off the connector in the tail.
The TC-POD is supposed to let you adjust for different profile tires and even 16.5" wheels
Disclaimer: This unit is supposed to hold its memory of the last setting, for some reason it does not anymore so you cannot adjust for different size tires. But it works just fine to change the setting on the fly, whenever turn your bike on it starts at level 6

The buttons on the clutch master are the controls and the unit is under the dash with the blue 6
Auto part Technology Vehicle Gauge Car
Auto part Vehicle Engine Automotive exterior Car

I have put 3K miles on these rotors and when I bought them used they looked spanking new
I don't have calipers but these things look super meaty
Tire Alloy wheel Wheel Spoke Automotive tire
 

·
Registered
Joined
·
828 Posts
Ah your killing me ☺ must resist temptation........

The sp quick shifter - is that a universal one that splices into ignition wires or is it 848 specific? I just picked up an sxv550 and may be interested in a universal quick shifter.
 

·
Registered
Joined
·
503 Posts
Discussion Starter · #16 ·
Ah your killing me must resist temptation........

The sp quick shifter - is that a universal one that splices into ignition wires or is it 848 specific? I just picked up an sxv550 and may be interested in a universal quick shifter.

It's a 2 wire so it should work with any qs with 2 wires?

Do I have the same rotors that you have?

And I do have that aluminum subframe we were talking about
 

·
Registered
Joined
·
828 Posts
It's a 2 wire so it should work with any qs with 2 wires?

Do I have the same rotors that you have?

And I do have that aluminum subframe we were talking about
Let me check how the SXV works. What do you mean by "2 wire" ?

I'll pass on the rotors - my 848 is track only and it takes a beating so I'd want something newer. I have the same ones on now, and love them!

I ended up picking up a motoholders from Phil on the forum here just a day before you posted this thread!
 

·
Registered
Joined
·
828 Posts
Man, I like that paintjob.
Yeah, tadashi is freaking killing me! $400 including tank for that painjob is a silly good price. I already have a corse scheme sharkskinz or I'd be on this like a fat kid on a cupcake :)
 

·
Registered
Joined
·
503 Posts
Discussion Starter · #20 ·
Yeah, tadashi is freaking killing me! $400 including tank for that painjob is a silly good price. I already have a corse scheme sharkskinz or I'd be on this like a fat kid on a cupcake :)

Wel I was thinking I was going to have to ship it so it would have been pretty pricey.. Someone local is picking it up haha oops
 
1 - 20 of 72 Posts
Top