Ducati.org forum banner
1 - 17 of 17 Posts

·
Registered
Joined
·
501 Posts
Discussion Starter · #1 ·
Yoyodyne slipper clutch for dry clutch bikes. Its in great condition and comes with the clutch pack out of my 1098. The plates and frictions are in good shape and have life left in them.

Asking $600
 

Attachments

·
Registered
Joined
·
158 Posts
This is a great slipper clutch.

One note: if this is from an Evo bike (1098 or 1198) then the nut and the top washer (the one in front of the spider spring) won't fit the non Evo bikes (like the 999). I've discovered this when trying to move my slipper from the 999 to the 1198.

In any case, I have the nut and washer from a 999 available, is anyone is interested.

Other than that, everything else fits like a charm.
 

·
Registered
Joined
·
8,735 Posts
What plates does it come with? Are those OEM plates or some other type and brand?
 

·
Registered
Joined
·
501 Posts
Discussion Starter · #8 · (Edited)
The plates are 12 tooth, not 48.
you're right, I thought he meant the inside hub which is actually 38t, my bad..

This is not the 48t slipper, yoyodyne also sells a 48t slipper but this isn't it. Sorry for the confusion (mine)


Pumpiniron, you use your stock clutch basket with this clutch
 

·
Registered
Joined
·
171 Posts
It can easily be upgraded to 48t by purchasing a basket and plates. I have a TSS (same as Yoyodyne) slipper with a 48t EVR basket and plates. The inner parts are the same in both 12 and 48t clutches.
 
1 - 17 of 17 Posts
Top