What are you planning on using the stand for? ever consider the side stand that holds the whole bike up? i dont know much about it besides that I came across it once on bellissimotos website.

http://www.bellissimoto.com/MotoMFGPaddockStand.html

 

i would stay away from those t-rex ones my buddy has one and the welds are not good quality

 

If you're triple has a hollow center, I'd go with a Pit Bull and find out what diameter of pin you need or call up Pit Bull and see if their Ducati specific frt lift will work with the Kyle triple.

 

My trex w/GSXR pin fits my Kyle clamps just fine.

 

99sh what type of bike do you have and do you have the 30mm dan kyle triple tree?

 

you can messure the inside diameter of the hole on the triple clamp. DK triple uses an 18mm pin. contact the stand manufacturer/supplier and ask them to send/sell you the pin and you're set.

 

Cool. I am ordering one this week.

 

I have a gsxr K6 750 and can use the Trex stem stand for that bike on my 1098 w/Kyle 30mm clamps.

 

these are the most beautiful front stands

 

AAA+ Pierobon

 

How do people feel on the the paddock stand that raises the whole bike up. Would you leave your bike on that stand for 12 months.

 

Yes I will on Pierobon

 

thanks bud :yo:

 

+1 on Pierobon.
I am emailing them now for pricing and ordering instrucitons. will post up any info I get.

http://www.pierobonframes.com/index...dex.php?option=com_virtuemart&page=shop.browse&category_id=20&Itemid=18&lang=en

 

They look expensive.

 

They are expensive
http://www.ducati-am-ring.de/uploads/file/Preisliste Zubehör.pdf

 

Hell I'm a cheap ass.
Don't whant to spent $120 for the TRex not eaven comes to discussion the Pitbull since, I don't see a functional benefit only confort to lube the chain without moving the bike.
In my mind there is no budget for Pierobon.
I will rather spent that money towards a helmet or PCIII or carbon bits.

 

freakin awesome customer service.
got the email back within 10 minues from Pierobon.
Front Stand for the Street 848/1X98 is:

" ...here the price of the front stand:
art. E06100A100
419,20 Euro + Tax + Shipment.
For the shipment cost, I need your delivery address..."

I think that about $600 USD. Not bad if you want an awesome front stand

 

freakin awesome customer service.
got the email back within 10 minues from Pierobon.
Front Stand for the Street 848/1X98 is:

" ...here the price of the front stand:
art. E06100A100
419,20 Euro + Tax + Shipment.
For the shipment cost, I need your delivery address..."

Holy S*&!
just got the return message on Shipping Costs to Texas:

"Ciao,
the cost of the Shipment is 309,23 Euro + Tax.
Kind regards,
Pierobon S.a.s. "

won't be doing this anytime soon.....

 

I looked at my SP yesterday and I don't have a hole in the bottom of the triple for a front fork stand I use on my jap bikes. for now I use a front wheel stand and hope I don't have to drop a fork anytime soon before figuring out how to lift the bike without that special pinless stand from pitbull

 

If you have the stock triple tree you will use a hook type triple tree stand instead of a pin. The t-rex and pit bull stands will work.

 

sucks pitbull doesn't sell just an adapter somehow for the pin type stand to just put that hook type one in, i would have to get the whole converter stand for it

 

Triple tree stands aren't expensive at all. In fact, I got one free with the Christmas tree! Merry Christmas everyone!

 

You can get it for $100 plus shipping from t-rex